PILLAR CANDLE MACHINE
This is a manual machine, it uses liquid wax as material. After pouring the liquid wax into the moulds on the machine, cycle cold water inside the machine will cool down and shape the liquid wax. Then turn or press the handle beside the machine to push candle out. This is a customizable product, candle size, shape and moulds number can be designed according to customer's require.
Manual Pouring machine operation steps as follows:
First, Thread the wick through the hole of each mould.
Pour the liquid wax into the mould of the machine until the liquid wax full of mould trough.
Second, some minutes later, The cold water (This is cycle---enter into one pipeline and out of another pipeline. ) will make the liquid wax cooling and shaping.
Finally, the worker should turn the handle which is beside of the machine. The taper candle will be pushed out of the mould.
SPECIFICATION:
1. Dimension: 1500*800*1500mm
2. Gross Weight: 190Kg
3. Specification of candles: Customization
4. Times of extrusion: 3-5 times/hour
CONTACT INFORMATION:
Chandler Fan
Audited Supplier 
){kind=link}